Voyager Fit / VOYAGER FIT MSC SLIM E3 NM WH

96670373

Change configuration

  • Base: 96670373 — VOYAGER FIT MSC SLIM E3 NM WH
  • Optic: ANT: open area emergency optic

Data Sheet

Self contained, surface mounted, non maintained, emergency lighting luminaire with 3 hour, manual test, emergency lighting circuit,. Housing: white (close to RAL9016) polycarbonate. Suitable for ceiling surface mounting. Class II electrical (this product is not earthed), IP20, IK07. Housing 33mm high for back cable entry. Complete with 6500K LED.

Interchangeable optics for anti-panic, escape route and spot applications included.


Dimensions: 123 x 123 x 33 mm
Weight: 0.27 kg

Self-contained emergency luminaires rely on long-lasting batteries. Voyager Fit's high-tech lithium iron phosphate battery is robust and comes with a three-year guarantee (applicable subject to the terms and conditions of and to the extent as set forth in the manufacturer's guarantee on Thorn products, which shall be applicable analogously and which is available under http://www.thornlighting.com/en/products/5-year-guarantee/5-year-warranty/terms-of-guarantee_en.pdf. The battery guarantee shall not come into effect if the product has been installed later than three(3) months after delivery EXW (Incoterms 2010).

Equipped with:

  • Optics polycarbonate lens for anti-panic emergency lighting.
Mode selection
  • Lamp position:ANT (open area optic)
  • Light Source:LED
  • Luminaire luminous flux*:200 lm
  • Colour Rendering Index min.:80
  • Correlated colour temperature*:6500 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L90 50000 h at 30 °C
  • Standby Power*:0.6 W
  • Charging power:2.5 W
  • LED
  • CE
  • Hfree
  • IP20
  • SC2

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)