Home / Products / Indoor Lighting / Downlights / Chalice 3 / Chalice 3 200 emergency / CHAL3 200 3000-830 EHF E3D RSB

Chalice 3 / CHAL3 200 3000-830 EHF E3D RSB

93901310

Data Sheet

A high efficient and sustainable LED downlight with low height. Suitable for mounting in ceiling thicknesses of 1 to 40 mm and Ø200mm cut-out with spring clips. Remote, pluggable, Fixed output LED driver NFC configurable with 3 hour, Self/DALI Addressable test, emergency lighting circuit. Body: die-cast aluminium for high efficient thermal management with recycling content >90%. Diffuser: polycarbonate. Reflector and trim: polycarbonate smooth reflector in satinbrite finish with wide beam. Class II electrical (this product is not earthed), IP54_IP20. Complete with 3000K LED

Installation in concrete ceilings not permitted.

Dimensions: Ø223 x 96 mm
Luminaire input power: 25.2 W
Luminaire luminous flux: 2960 lm
Luminaire efficacy: 117 lm/W
Weight: 1.39 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:2960 lm
  • Total emergency luminous flux:380 lm
  • Luminaire efficacy*:117 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28005149 LC 25/200-650/38 NF SR EXC3 Z
  • Ballast 2:1 x 89801166 cPK PRO SLIM w/o Battery
  • Correlated colour temperature*:3000 Kelvin
  • Chromaticity tolerance (initial MacAdam):3
  • Rated median useful life*:L90 50000 h at 25 °C
  • Luminaire input power*:25.2 W Power factor = 0.93
  • Dimming:FIX
  • Maintenance category CIE 97:C - Closed Top Reflector
  • LED
  • CE
  • NoIsol
  • GLedReP
  • 850°
  • Hfree
  • IK09
  • IP54_IP20
  • LLedReP
  • RG1
  • SC2
  • Ta=25
  • UKCA

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)